Roll Forming Machine (AF-R1000)
Basic Info
Model No.: AF-R1000
Product Description
Basic Info. Model NO.:AF-R1000 Certification:CE Condition:New Name:Roll Forming Machine Machine Color:as Require Machine Size:7.5m*1.4m*1.4m Machine Weight:4tons Size of Container:40gp Delivery Time:30days Control System:PLC Cutting Type:Hydraulic Driven Type:Chain Type:Roof and Wall Trademark:Aofa Specification:SGS Origin:Shanghai Forming machine
Steel tile roll forming machine
1. Brif introduction
The machine has advantages of faster molding, higher productive capacity, and superior performance of finished product, conveniently operation and reliability.
1. PLC automatic control system, stability and easily for operation. Machine adoption hydropneumatic for pressing, it has higher production capacity.
2. Using cement and sand as the main raw material for production, with higher strength of finished product. The cement tile is perfectly used for house construction.
3. The machine can produce various kinds of tiles through changing mould, such as European tile, Flat tile, Bone tile, Edge tile and etc. And this machine can also produce different kinds of colorful floor tiles.
2. Working flow:
Decoiler----feeding-----roll forming-------cutting-----output table
3. Technical description:
A. Decoiler
Capacity(Max): 5MT
Coil width(Max. ): 1300mm
B. Roll forming system
1. Main motor power: 5.5kw
2. Drive: Chain
3. Main shaft dia: 76mm, material: 45#refined forge steel
4. Roller material: 45# forge steel, quenched treatment, chrome coated 0.05mm
5. Roll station: 14stations
6. Raw material: Color steel and galvanized steel
7. Thickness of raw material: 0.4-0.8mm
8. Width of material: 1250mm
9. Working speed: About 5m/min(Exclude punching time)
10. PLC: YASKAWA, made in Japan. 380V 50Hz(Depend on customer)11. Computer operating panel: Touching screen
C. Hydtraulic Cutting system
1. Hydraulic cutting
2. Hydraulic power: 5.5KW
3. Blade material: Cr12MOV, quenched 58° -62°
4. Working pressure: 20mpa
D. Control system
1. Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
2. Automatic length measurement
3. Automatic quantity measurement
4. Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved.
5. Length inaccuracy can be amended easily.
6. Control panel: Button-type switch and touch screen
7. Unit of length: Millimeter (switched on the control panel) Contact us if you need more details on Glazed Tile Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Glazed Tile Roll Forming Machine、Tile Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Steel tile roll forming machine
1. Brif introduction
The machine has advantages of faster molding, higher productive capacity, and superior performance of finished product, conveniently operation and reliability.
1. PLC automatic control system, stability and easily for operation. Machine adoption hydropneumatic for pressing, it has higher production capacity.
2. Using cement and sand as the main raw material for production, with higher strength of finished product. The cement tile is perfectly used for house construction.
3. The machine can produce various kinds of tiles through changing mould, such as European tile, Flat tile, Bone tile, Edge tile and etc. And this machine can also produce different kinds of colorful floor tiles.
2. Working flow:
Decoiler----feeding-----roll forming-------cutting-----output table
3. Technical description:
A. Decoiler
Capacity(Max): 5MT
Coil width(Max. ): 1300mm
B. Roll forming system
1. Main motor power: 5.5kw
2. Drive: Chain
3. Main shaft dia: 76mm, material: 45#refined forge steel
4. Roller material: 45# forge steel, quenched treatment, chrome coated 0.05mm
5. Roll station: 14stations
6. Raw material: Color steel and galvanized steel
7. Thickness of raw material: 0.4-0.8mm
8. Width of material: 1250mm
9. Working speed: About 5m/min(Exclude punching time)
10. PLC: YASKAWA, made in Japan. 380V 50Hz(Depend on customer)11. Computer operating panel: Touching screen
C. Hydtraulic Cutting system
1. Hydraulic cutting
2. Hydraulic power: 5.5KW
3. Blade material: Cr12MOV, quenched 58° -62°
4. Working pressure: 20mpa
D. Control system
1. Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
2. Automatic length measurement
3. Automatic quantity measurement
4. Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved.
5. Length inaccuracy can be amended easily.
6. Control panel: Button-type switch and touch screen
7. Unit of length: Millimeter (switched on the control panel) Contact us if you need more details on Glazed Tile Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Glazed Tile Roll Forming Machine、Tile Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Tile Making Machine
Premium Related Products
Other Products
Hot Products
EPS Sandwich Panel Machine (AF-S1000)C Purlin Roll Forming Machine (AF-80-300)H Beam Welding Lineguard rail forming machineroll forming equipmentDump truckCovering Machinecold steel HVM series High speed roll forming machineEPS sandwich panel machineSIN beam Automatic Welding Linegalvanized sheet slitter making machine/steel plate slitting machineDownspout/downpipe roll forming machine hot sellwall roof tile floor deck panel forming machine floor tile making automatic machineDouble Feeding C U Shape Metal Stud Channel rolling forming machineAdvanced Multi-Model Color Steel Roof Panel Roll Forming MachineAuto Steel Coil Holder/Hydraulic Uncoil With Coil Car 5 Tons