Bangnuo steel floor Panel roll forming machine

Our Company               Jiangyin Bangnuo Machinery Co., Ltd. is a professional manufacturer dedicated Color light steel construction, C, Z steel equipment and rolling, bending molding equipment enterprises, with the design and manufacture of various types of steel sheet thickness roll forming production line strength. Pressed tile color steel plate and C, Z purlin products are widely used in various types of large and small industrial plants, warehouses, residential and high-rise buildings. With economic development, building light steel building applications on the growing popularity of the increasing demand for production equipment, production equipment automation requirements are also increasing, company investment, research and development of various types of color steel pressure plate (W) production line and C, Z-beam (purlin) production equipment, the use of simple, improve productivity, reduce production costs. Various existing models of steel pressure plate (W) C, Z-beam (purlin) automatic control production line are at the leading position at home and abroad, with a compact structure, reasonable design, constantly updated progress and much Strut Builders and products the favor and praise.
             Company specializing in the production of Dagong machines, floor plate machine, guardrail plate machine, corrugated tile machine, shearing machine, sub-board machine, highway guardrail, tile machine equipment, automatic tile press, iron Piva machine, iron tile machine, all automatic C-shaped steel machine, glazed tile machine.

Product Description Machine comopsition

1: 5T Manual decoiler
Dimensions	1700mm*1000mm*800mm
Width of feeding	1250mm
Maximal out diameter	1500mm
Mode of expand &fight	inner expand &fight by manual
Way of feeding	manual
Color	blue
Quantity	1

Feeding
Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Feeding type	adjustable
Feeding width	1000mm
Entrance and guide roller	diameter is ￠76mm, material is SAE1045, surface with chrome
Quantity	1

Pre-cutting
Pre-cutting install after feeding for customer change coil only
Cutting type	manual
Function	for coil replacement
Quantity	1

Forming Section
Material of the profile	GI or color steel
Thickness range	0.3-0.8mm
Main motor power	5.5kw, AC motor, motor inside of main machine
Machine Voltage, Frequency, Phase	380 V, 50 Hz, 3Phase
Roll station	about 18 stations （according the final design）
Shaft diameter	￠70mm material: SAE1045 with quenching and temperin
Machine roll forming speed	not less than 30m/min
Transmission	by chain, one inch, single line
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
In the main Roll Forming Machine have 2 buttons for urgency stop if happen any malfunction.
Machine adopt new station to make machine more strong
To avoid accidents,all of drive part adopt protect cover
Color of machine	Blue and yellow (or base on customer request)
Quantity	1

Post cutting system
Profile transversal cutting device units allowing to cut the bent profile without damaging the metal coating and to assure a smooth cut included
Cutting after forming	Cut the sheet after roll forming to required length
Material of blade	Cr12, 58-62 HRC hardness
Cutting power	hydraulic,4KW
Working pressure	12Mpa adjustable
Length measuring	Automatic encoder length measuring, brand: Omron
Tolerance of length	+/- 1.5mm for each piece end product
The cutting sequence is also contained and controlled by the same PLC program
Quantity	1

3: out-table
Jointed by 60mm*40mm tube
Size	1.0m long*0.8mwide*0.6-1mhigh
One out table with two support roller

4: Hydraulic station
Hydraulic power	4kw
Working pressure	12Mpa adjustable
Solenoid valve	1 group
Hydraulic oil	46# hydraulic oil
Color	Blue (or base on customer request)
Quantity	1

5: Control desk
Programmable setting of profile length and quantity
Programmable cutting unit, various lengths in one programming cycle withoutquantity restrictions (without stopping the operating equipment): will be provided. 5 groups datas canbe set in one time
Automatic stopping of the equipment after completion of the cutting programme:will be provided.
Operating system language	English and Chinese
Voltage, Frequency, Phase	380 V, 50 Hz, 3Phase
Computer used to control length & quantity. Machine will automatically cut tolength and stop when required quantity is achieved
Control panel	Button-type switch and touch screen
Unit of length	millimeter (switched on the control panel)
PLC brand	Panasonic
Frequency converter brand	Yaskawa, quantity: 1
Touch screen	Taiwan Weinview

Our Service Pre-sales service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.


After-sales service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

Certifications Packing & Delivery Related Products Products Name with link 91.8% Response Rate Products Name with link 91.8% Response Rate Products Name with link 91.8% Response Rate

Contact us if you need more details on Cold Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cold roll forming machine、Cold Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Steel Roofing/Panel Roll Forming Machine