Find Steel Roofing Forming Machine, Panel Roll Forming Machine, Guiadrail Roll Forming Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Steel Roofing/Panel Roll Forming Machine > Automatic Gutter sheet cold roll forming machine for steel,gutter roll forming machine

Automatic Gutter sheet cold roll forming machine for steel,gutter roll forming machine

Product Description

Our Company   Jiangyin Bangnuo Machinery Co., Ltd. is a professional manufacturer dedicated Color light steel construction, C, Z steel equipment and rolling, bending molding equipment enterprises, with the design and manufacture of various types of steel sheet thickness roll forming production line strength. Pressed tile color steel plate and C, Z purlin products are widely used in various types of large and small industrial plants, warehouses, residential and high-rise buildings. With economic development, building light steel building applications on the growing popularity of the increasing demand for production equipment, production equipment automation requirements are also increasing, company investment, research and development of various types of color steel pressure plate (W) production line and C, Z-beam (purlin) production equipment, the use of simple, improve productivity, reduce production costs. Various existing models of steel pressure plate (W) C, Z-beam (purlin) automatic control production line are at the leading position at home and abroad, with a compact structure, reasonable design, constantly updated progress and much Strut Builders and products the favor and praise.



Company specializing in the production of Dagong machines, floor plate machine, guardrail plate machine, corrugated tile machine, shearing machine, sub-board machine, highway guardrail, tile machine equipment, automatic tile press, iron Piva machine, iron tile machine, all automatic C-shaped steel machine, glazed tile machine.
Product Description

General properties:      Maximum production speed: not less than 12 metres per minute (excluding cutting);

    Material: 0.3-0.8mm, GI or clor steel

Composition of machine: 1. 3T Hydraulic Decoiler

2. Feeding→pre-cutting→forming station→Post cutting system

3. Transmission table

4. Hydraulic station

5. Control desk

6. Spare part list

Profile, layout & production flow: Material of the profile: GI or color steel

Thickness range: 0.3-0.8mm

Coil width: 255mm

Height: 64±2,effective width: 77±2mm
Finished product length: from 500 mm to (at least) 12’000 mm

Layout of machine (only for reference, the exactly one will be send to customer in 20 days after confirmed order)

Working direction base on customer request:

The production flow of equipment: Hydraulic decoiler→ Feeding→roll forming→post cutting 
Detailed Images
                                                                               3T hydraulic decoiler 
Coil weight (Max)
3000kg 
Inter diameter of coil
420mm-510mm
Working by hydraulic pressure
8-12Mpa with connect with the decoiler hydraulic unit
Working lift journey
Maximal 250mm
Working function
forward and reverse movable
Move journey
 maximal 2 meters
Color
blue or base on customer request
Details 3T hydraulic decoiler Single unrolling machine, one side can put material
Adopt automatic hydraulic system for expand
Coil weight (Max):3000kg
Inter diameter: 420mm-510mm
Maximal out diameter:1300mm
Oil cylinder dia:100mm
Coil width (Max.)500mm
Working speed: 0-15m/min adjustable
Main motor power: 4KW AC motor
Hydraulic power: 3kw
Frequency converter brand: Yaskawa
De-coiler should be with Loop control and hold down, and with baffle for forbid coil fall down
Machine have function of forward and reverse working
The decoiler have 4 segments
Quantity: 1
Color: blue or base on customer request

Feeding→Pre-cutting→ roll forming Feeding
Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Feeding type: adjustable
Feeding width:255mm
Entrance and guide roller: diameter is ¢76mm, material is SAE1045, HRC48-52° surface with chrome
Quantity: 1

Pre-cutting Pre-cutting install after feeding
Cutting type:manual
Function:for coil replacement
Quantity: 1

Forming Section Material of the profile: GI or color steel
Thickness range: 0.3-0.8mm
Main motor power:5.5kw, AC motor, motor inside of main machine (Brand: Guomao of China)
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: about 16 stations (according the final design)
Roller material:ASTM1045 chrome plated surface with chrome,CNC,
Shaft diameter: ¢65mm material: SAE1045 with quenching and tempering  Machine roll forming speed:not less than 12m/min
Transmission: by chain, one inch, Single line
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
In the main Roll Forming Machine have 2 buttons for urgency stop if happen any malfunction.
Machine adopt metal new structure as station
To avoid accidents, all of drive part adopt protect cover
Color of machine: Blue and yellow (or base on customer request)
Quantity: 1


Post cutting system Profile transversal cutting device units allowing to cut the bent profile without damaging the metal coating and to assure a smooth cut included;
Feeding of the last cut profile from the equipment: automatic if the length of the last profile is not less than 100 mm;
Cutting after forming: Cut the sheet after roll forming to required length
Uses two hydraulic cylinders for operation shall include a flow regulator to achieve a uniform lowering knife.
Material of blade:Cr12, 58-62 HRC hardness
Cutting power by hydraulic, 5.5KW
Working pressure: 12Mpa adjustable
Length measuring: Automatic encoder length measuring, brand: Omron
The cutting sequence is also contained and controlled by the same PLC program
Tolerance of length: +/- 1.5mm for each piece end product
Quantity: 1

Hydraulic station: Hydraulic power: 5.5kw
Working pressure: 12Mpa adjustable
Solenoid valve: 1 groups
Hydraulic oil: 46# hydraulic oil
Color: Blue (or base on customer request)
Quantity :1

Control desk Programmable setting of profile length and quantity
Programmable cutting unit, various lengths in one programming cycle without quantity restrictions (without stopping the operating equipment): will be provided. 5 groups datas canbe set in one time
Automatic stopping of the equipment after completion of the cutting programme:will be provided.
Operating system language: English and Chinese
Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved Length inaccuracy can be amended easily.
Control panel: Button-type switch and touch screen
Unit of length: millimeter (switched on the control panel)
PLC brand: Panasonic
Frequency converter brand: Yaskawa, quantity: 2
Touch screen: Taiwan Weinview

Project photo:
Our Service Pre-sales service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.



After-sales service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.
Packing & Delivery Related Products Products Name with link 91.8% Response Rate Products Name with link 91.8% Response Rate Products Name with link 91.8% Response Rate

Contact us if you need more details on roll forming machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Roll Forming Machine、Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Steel Roofing/Panel Roll Forming Machine