Bangnuo arch metal roof ridge cap steel sheet bending machine cold rolled forming machine

Our Company     Jiangyin Bangnuo Machinery Co., Ltd. is a professional manufacturer dedicated Color light steel construction, C, Z steel equipment and rolling, bending molding equipment enterprises, with the design and manufacture of various types of steel sheet thickness roll forming production line strength. Pressed tile color steel plate and C, Z purlin products are widely used in various types of large and small industrial plants, warehouses, residential and high-rise buildings. With economic development, building light steel building applications on the growing popularity of the increasing demand for production equipment, production equipment automation requirements are also increasing, company investment, research and development of various types of color steel pressure plate (W) production line and C, Z-beam (purlin) production equipment, the use of simple, improve productivity, reduce production costs. Various existing models of steel pressure plate (W) C, Z-beam (purlin) automatic control production line are at the leading position at home and abroad, with a compact structure, reasonable design, constantly updated progress and much Strut Builders and products the favor and praise.

     Company specializing in the production of Dagong machines, floor plate machine, guardrail plate machine, corrugated tile machine, shearing machine, sub-board machine, highway guardrail, tile machine equipment, automatic tile press, iron Piva machine, iron tile machine, all automatic C-shaped steel machine, glazed tile machine.
Product Description General properties 1)Maximum roll forming speed: not less than 15meters per minute
2)Bending precision: the maximum profile deviations (dimensions and shape) shall not exceed the tolerances specified as following data (or equivalent tolerances);
3)Bending quality: ability to bend the profiles of the specified configuration at the specified maximum steel thickness; cracking of the steel or metal coating is not permitted for all required steel grades.

Detailed Images The structure of equipment:

Uncoiler
Dimensions	1700mm*1000mm*800mm
Width of feeding	300mm
Capability	3Ton
Range of expand(by manual)	420mm—510mm
Mode of expand &fight	inner expand &fight by manual
Way of feeding	manual

Feeding →roll forming→pressing→t post cutting

Feeding
Armed adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Entrance table-guide	adjustable
Entrance width range	400-420mm
Entrance and guide roller	diameter is ￠56mm, material is sae1045, surface with chrome

Forming Section
Profile steel thickness between 0.4mm and 0.7mm
Main motor power	4kw, AC motor, side motor to save space (Brand: guomao which made in China)
Machine Voltage, Frequency, Phase	380 V, 50 Hz, 3Phase
Roll station	7stations+4 station of side roller (base on final design)
Roller  material	SAE1045, chrome plated surface
Shaft diameter	￠65mm
material	SAE1045
Working type	up shaft is initiative, down shaft is passive
Machine roll forming speed	not less than 15m/min
Roll former has leveling bolts in the base for adjust the leveling
Machine base frame adopt H beam welding steel
In the main Roll Forming Machine have 1 button for urgency stop if happen any malfunction.
Transmission	by chain, 1.0inch double line

To avoid accidents, the line consisting of: flatter, roll form and guillotine will be covered by a mobile C-shaped yellow safety net, as shown below.
Sample photo for reference:

Press and post cutting
Machine adopt hydraulic press and post-cutting
Press distance is adjustable by PLC system
Cutting after forming	Cut the sheet after roll forming to required length
Cutting motion	The main machine is will stop when cutting, after this motion will start again automatically.
Material of blade	Cr12 with heat treatment 58-60°1 sets cutter
Length measuring	Automatic encoder length measuring, brand: Omron
Tolerance of length	3000mm+/- 1.0mm
Cutting table length	2m

Profile, layout & production flow: Profile thickness between 0.4mm and 0.7mm

Effective width: base on profile 406mm (final is base on testing result)

Following profile in only for customer reference, the exactly can be provide by customer

This machine adopt post-cutting.

Length tolerance: ±1.5mm per each pieces

Layout of machine （only for reference, the exactly one will be send to customer in 20 days after confirmed order）

 Working direction base on customer request:

Sample of end product:
Project for reference:
Certifications Our Service Pre-sales service

* Inquiry and consulting support.
* Sample testing support.
* View our Factory.


After-sales service
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
Packing & Delivery Related Products Products Name with link 91.8% Response Rate Products Name with link 91.8% Response Rate Products Name with link 91.8% Response Rate

Contact us if you need more details on roll forming machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Ridge Cap、Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Steel Roofing/Panel Roll Forming Machine