Hvc Sand Trap Louvers Roll Forming Machine Manufacturers Riyadh
Basic Info
Model No.: BOSJ-V
Product Description
Model NO.: BOSJ-V Automatic Grade: Automatic Type: Straightening Machine Feature: Automation Warranty: 12 Months Forging Forming Method: Mold Forging Trademark: BOSJ Control Type: CNC Drive: Hydraulic Power Source: Hydraulic Pressure Advantage: Use Widely Certification: SGS, ISO9001, CE Customized: Customized Origin: Jiangsu 1, Forming process
De-coiler—Servo feeding—Gap and cut off mould—Forming ---collection table
2, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
3, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity:2 T
B, Inner diameter of coil:490-510mm
Outer diameter≤1200mm
2.Servo feed and punching unfilled corner parts
A, Servo motor:Used Mitsubishi Servo motor, power:1.0kw
B, Punching unfilled corner die:4 pillars punching die
C, Material of punching die:Cr12.Quenching treatment
2, Feeding:Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould:GCr15, quenching treatment:Rigidity:HRC56-62º
C, Motor:7.5kw frequency conversion engine
4, Electric control:PLC system
Technical Parameters:
Equipment technique requirement:
Equipment floor space:23×3.0×2.5(L×W×H)meter.
Equipment feeding material the orientation:The left side enter and right leave.
Voltage:380V,50Hz,3phase.
Hydraulic oil :NO:.46#
Gear oil:18# Hypoid dear oil
Equipment main technical parameters:
Raw material width:Around 196 mm
Material thickness:G.I=0.7~1.2mm
Material:Galvanized and stainless sheet
Production speed:Around 6M/min
Production length:≥3000mm
Equipment total installed capacity:Around 20KW.
Roll forming production scope
This rollforming machine can be make the thickness from 0.8mm to 1.2mm
Parameters of main equipment:
1 - De-coiler
Material width:≤250 mm, Material thickness≤2.0mm;
Inner diameter:480-520 mm;
Outer diamete:φ1200mm;
Max.Load capacity:≤2T
2 - Leveling system
Use 9 roller leveling,
Power 2.2 kW,
Speed:10M/min
3 - Servo feeding system
BNC-30Technical parameters:
BNC-300
The feed shaft diameter:φ60mm
Measuring diameter of shaft:φ60mm
Maximum feed plate of width:≤300mm
Maximum feed plate of thickness:≤2.5mm
Maximum feed speed:≤40m/min
Feeding and blanking step length tolerance:±0.20mm
Feed products overall length tolerance:±0.25mm
Servo motor power/brand:1.3KW/Japan Yaskawa
TransmissionSynchronous wheel / gear
Length measuring encoder:ROUNDSS 2500P
4- Notching, punching hole and cutting
Structure:Hydraulic punching structure,the welded steel frame, has good inflexibility
First notching dies:2 sets
First punching die:1 set
After forming notching dies:2 sets
After forming cutting die:1set
5 - Main rollforming machine
Forming steps:14 group
Forming framework:Use the wall type side plategear drive
Side wall thickness:25mm
Max material width:≤196mm
Min material thickness:0.7mm
The roll shaft diameter:φ48 mm
Roller material:Cr12MoV,the quenching hardness,HRC58-62°
Use of double bearing design, bearing type 6208
The main drive motor uses 5.5kw frequency conversion motor.
6 - Cutting system
A.ModalityHydraulic cutting
B.Design featureafter cutting system design in the forming machine, the cutting Length can be set.
7 - Run-out table
Framework:Platform typewithout power
8 - Electrical control system
1-The whole line adopts PLC control, LCD touch screen display and man-machine interface software.(Interaction between workers and PLC.)
The operator can do the following
The setting program (PLC)
Monitoring the control process,
Modify the control parameters,
The length of the workpiece digital setting,
The length of the workpiece adjusting.
Running state real-time monitoring equipment and fault indication.
2- Mode of operation:Manual / auto two.With manual, automatic switching function:In the manual mode, can be stand-alone operation, convenient repair;In the automatic mode, all production and operation, the start up sequence;Along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel.
Contact us if you need more details on Damper Shell Molding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fire Damper Roll Forming Machine、Vane Damper Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
De-coiler—Servo feeding—Gap and cut off mould—Forming ---collection table
2, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
3, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity:2 T
B, Inner diameter of coil:490-510mm
Outer diameter≤1200mm
2.Servo feed and punching unfilled corner parts
A, Servo motor:Used Mitsubishi Servo motor, power:1.0kw
B, Punching unfilled corner die:4 pillars punching die
C, Material of punching die:Cr12.Quenching treatment
2, Feeding:Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould:GCr15, quenching treatment:Rigidity:HRC56-62º
C, Motor:7.5kw frequency conversion engine
4, Electric control:PLC system
Technical Parameters:
Equipment technique requirement:
Equipment floor space:23×3.0×2.5(L×W×H)meter.
Equipment feeding material the orientation:The left side enter and right leave.
Voltage:380V,50Hz,3phase.
Hydraulic oil :NO:.46#
Gear oil:18# Hypoid dear oil
Equipment main technical parameters:
Raw material width:Around 196 mm
Material thickness:G.I=0.7~1.2mm
Material:Galvanized and stainless sheet
Production speed:Around 6M/min
Production length:≥3000mm
Equipment total installed capacity:Around 20KW.
Roll forming production scope
This rollforming machine can be make the thickness from 0.8mm to 1.2mm
Parameters of main equipment:
1 - De-coiler
Material width:≤250 mm, Material thickness≤2.0mm;
Inner diameter:480-520 mm;
Outer diamete:φ1200mm;
Max.Load capacity:≤2T
2 - Leveling system
Use 9 roller leveling,
Power 2.2 kW,
Speed:10M/min
3 - Servo feeding system
BNC-30Technical parameters:
BNC-300
The feed shaft diameter:φ60mm
Measuring diameter of shaft:φ60mm
Maximum feed plate of width:≤300mm
Maximum feed plate of thickness:≤2.5mm
Maximum feed speed:≤40m/min
Feeding and blanking step length tolerance:±0.20mm
Feed products overall length tolerance:±0.25mm
Servo motor power/brand:1.3KW/Japan Yaskawa
TransmissionSynchronous wheel / gear
Length measuring encoder:ROUNDSS 2500P
4- Notching, punching hole and cutting
Structure:Hydraulic punching structure,the welded steel frame, has good inflexibility
First notching dies:2 sets
First punching die:1 set
After forming notching dies:2 sets
After forming cutting die:1set
5 - Main rollforming machine
Forming steps:14 group
Forming framework:Use the wall type side plategear drive
Side wall thickness:25mm
Max material width:≤196mm
Min material thickness:0.7mm
The roll shaft diameter:φ48 mm
Roller material:Cr12MoV,the quenching hardness,HRC58-62°
Use of double bearing design, bearing type 6208
The main drive motor uses 5.5kw frequency conversion motor.
6 - Cutting system
A.ModalityHydraulic cutting
B.Design featureafter cutting system design in the forming machine, the cutting Length can be set.
7 - Run-out table
Framework:Platform typewithout power
8 - Electrical control system
1-The whole line adopts PLC control, LCD touch screen display and man-machine interface software.(Interaction between workers and PLC.)
The operator can do the following
The setting program (PLC)
Monitoring the control process,
Modify the control parameters,
The length of the workpiece digital setting,
The length of the workpiece adjusting.
Running state real-time monitoring equipment and fault indication.
2- Mode of operation:Manual / auto two.With manual, automatic switching function:In the manual mode, can be stand-alone operation, convenient repair;In the automatic mode, all production and operation, the start up sequence;Along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel.
| NO. | Project | Unit | parameters | Remark | |
| 1 | Material | type | Mild steel Galvanized sheet | ||
| Strength of material sheet | Map | ≥350 | |||
| Thickness of material sheet | mm | 0.8~1.5 | |||
| 2 | Size of production | mm | Reference the picture | ||
| 3 | Production speed | m/min | 6~8 | ||
| 4 | Material of roller | GCr quenching treatment | |||
| 5 | Drive type | Gear box | |||
| 6 | Power | kw | About 34 | ||
| 7 | Electric control system | PLC variable frequency control | |||
| 8 | Dimensions(Length*width*height) | m | 28X4X3.9 | ||
Product Categories : Vane Damper Roll Forming Machine
Other Products
Hot Products
EPS Sandwich Panel Machine (AF-S1000)C Purlin Roll Forming Machine (AF-80-300)H Beam Welding Lineguard rail forming machineroll forming equipmentDump truckCovering Machinecold steel HVM series High speed roll forming machineEPS sandwich panel machineSIN beam Automatic Welding Linegalvanized sheet slitter making machine/steel plate slitting machineDownspout/downpipe roll forming machine hot sellwall roof tile floor deck panel forming machine floor tile making automatic machineDouble Feeding C U Shape Metal Stud Channel rolling forming machineAdvanced Multi-Model Color Steel Roof Panel Roll Forming MachineAuto Steel Coil Holder/Hydraulic Uncoil With Coil Car 5 Tons