Find Cable Tray Roll Forming Machine, Cable Tray Roll Forming Machinery, Cable Tray Forming Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Cable Tray Roll Forming Machine > Cable Tray Ladder Type Installation Manufacturer--Bosj

Cable Tray Ladder Type Installation Manufacturer--Bosj

Basic Info

Model No.:  BOSJ-C

Product Description

Model NO.: BOSJ-C Production Speed: 20m/Min Control Type: Auto Origin: Jiangsu Control System: PLC Control System Material of Roller: Gcr 15 Trademark: BOSJ HS Code: 8455212000
1.Cable brige production line
3.feeding table
4.Gantry type roll forming part

1, Equipment capabilities
It can according to the need to produce the steel width (60mm≤§≤860mm), many kinds of specification electric cable bridges and other structure product.
Product speed by punching: 2.55m/min
Continuous rollforming speed: 1015m/min
Material thickness: 1~2mm
Material require: Q235 cold roll steel
Production line has automatic and manual two operating mode, may realize the linkage and the partition revolution work.
2, Main composition of machine
This unit consists of the decoiler, ML-900 flatting, 200 punch, die, servo feeding, guider, main Roll Forming Machine, follow cutting, cut-to-length part, recoiler, electrical control cabinet; etc.
3,Each part major technical parameters
3.1 Drive decoiler
  Material width860mm
Material weight6000kg
Material inner diameter460510mm
Material outer diameter1200mm
Drive power: electromotor and speed reducer integration, 4KW frequency conversion electromotor
    Frame type: cantalever inner support, manual handle afterbody, pneumatic press cantalever.
3.2 Flatting
Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.
Flatting bound: material thickness 12mm, material width 100860mm
Drive power: 5.5kw frequency conversion electromotor
Speed reducer model: ZQ250
flatting speed:310 m/min
Parenthesis up and down a pair of fortified wheel
3.3 Continual punching mould
Amount: Each kind of width specification 1 set dies, total 6 sets
Die require: Cr12 quench
3.4 Servo feeding set
Servo electromotor power: 4.4kw
Multistage type feeding, memory ten group of memory functions
  Man-machine contact surface numerical control system
  Uses Mitsubishi servometer
3.5 Holds material (use in cushion section)
The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing.
3.6 Guider
   A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets.
3.7 Main roll forming machine
Type: GY180(Extra wide)
Rack structure:Dragon Gate type memorial arch frame
forming frame: 16 sets
    Forming variety: bridge frame
material max width:860mm
material max thickness:≤2.0mm
forming width: 100600mm
forming height: 50100mm
The diameter of the roller axis: 85mm
Roll mould material: Gcr15,quenching treatment:HRC58-62°
Drive type:30kw frequency conversion electromotor, ZQ500 Main speed  reducer
Autocephaly distribute gear case
3.8 Hydraulic cutting
Hydraulic pumping station: 5.5kw
blade cuttimg, blade material Cr12, quench treatment
3.9  Electrical control
3.9.1 Main operation control cubicle
Amount: 1 set
Frequency conversion: 3sets(in main control cubicle, control decoiler, flatting and roll forming machine)
PLC control: 1 set
8 inch liquid crystal touchscreens
All electrical element is the Mitsubishi original installation brand
3.9.2 Assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control styp: manual handle
4,Produce condition
capability: about 71.5kw
gas fountain: 0.9 cube/min
Production land area: 33m*3m


Project Unit Parameter Remark

Material Type High strength steel

Strength of material sheet Map ≥350
Thickness of material sheet mm 1.2~2.0
2 Size of production mm      
Reference the picture

3 Production speed m/min Punching speed 4m/min
Forming speed 10m/min

4 Material of roller

GCr15 quenching treatment
5 Drive type
6 Power kw About 75
7 Electric control system
PLC variable frequency control
8 Dimensions(Length*width*height) m 55X4X3.9

Contact us if you need more details on Roll Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cable Tray Roll Forming MachineCold Roll Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Cable Tray Roll Forming Machine